Motion Pro Pivot Suspension Vise



Motion Pro Pivot Suspension Vise
• Designed to make suspension service simple and quick
• Holds shocks and forks securely while you change oil, re-valve, or change seals
• Pivoting head holds parts in any position, with mechanical stops every 45 degrees
• Large side holds 40 mm to 61 mm diameter parts
• Small side holds 16 mm to 34 mm diameter parts
• Movable fluid catch pan with mesh insert, and threaded drain bung
• Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system
• Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench
How it works on forks:
• Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip
• Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
• Can be used to assist in removing compression valve assembly (use of stock front axle required)

How it works on shocks:
• Holds shock firmly around shock body, shaft or shock reservoir
• Facilitates removal of piston rod and seal head
• Facilitates removal of shock reservoir caps, chamber pistons or bladder
• Holds shock to remove spherical bearings or needle bearings
• Holds shocks for removal of shock spring
More Info
What do you think?
Tools & Tool Bags

The Latest