KX250F Project Bike Wrap-Up

View as: Slideshow | One Page
You're listening to: Vital MX's Michael Lindsay.
Parts Pictured: Works Connection radiator braces and engine plugs, Decal Works graphics, Tokyo Mods manual cam-chain tensioner, ICW radiators.
Parts: Lightspeed skidplate and footpegs, CV4 radiator hoses, Boyesen water pump, Hinson clutch cover, FMF Megabomb head-pipe, SDI linkage and bell crank.
Parts: X-Trig triple clamps, Renthal Twinwall bars and kevlar grips, Arc clutch perch and composite brake lever, Showa A-kit forks set up by Enzo, Tokyo Mods Vortex ignition, Works Connection master-cylinder covers.
Parts: Galfer oversized superlight front Tsunami rotor, Ride Engineering billet brake caliper and steel-braided brake line, Excel A-60 rims, Dunlop Geomax MX32 80/100-21 tire.
Parts: FMF 4.1 RCT exhaust, MotoSeat pleated cover, DT1 air-filter and cage, Cycra plastic kit, Showa A-kit shock set up by Enzo, Dunlop MX32 110/90-19 tire.
Parts: Rad Eagle series hubs with black spokes and nipples, Galfer rear wave rotor, Works Connection axle blocks.
Parts: Lightspeeed extended chain guide, Excel chain, Renthal rear sprocket.
Intro Graphic
Going all in and building a bike from a frame up is so rewarding, especially when you finally get to kick it over and hear her run. Check out what went into our latest build and hear it run a few laps with our thoughts.

The Latest