Posts
203
Joined
4/21/2011
Location
CA
Cylinder redone at millenium (8h)
piston 8h
custom air boot CP500
All motor/transmission bearing new in 2015 (38h)
boyesen ignition cover
boyesen clutch cover
pipe + silencer Pro-Circuit works
Pipe + silence FMF
seat cover Moto seat
skid plate works connection
clutch lever works connection black
brake lever ASV black
rim tusks noir (2.15 not the 1.85 that come from the 250F)
hubs gold powder coat
chaine DID ert2 (8h)
sproket renthal (8h)
Forks Exxtreme MX revalve spec + Pro-Circuit National Tube (a-kit parts) + 0.49kg spring
Shock Exxtreme MX revalve + works piston (A-kit) + Rebound separator valve + Ti plate etc
rad valve boyeseen
fuel pump conversion plate from loudmouthMX
Welding done by a professionnal. Not issue in 38h of used.
I ask 8500$CAD and I live 30minutes from the Vermont border.
piston 8h
custom air boot CP500
All motor/transmission bearing new in 2015 (38h)
boyesen ignition cover
boyesen clutch cover
pipe + silencer Pro-Circuit works
Pipe + silence FMF
seat cover Moto seat
skid plate works connection
clutch lever works connection black
brake lever ASV black
rim tusks noir (2.15 not the 1.85 that come from the 250F)
hubs gold powder coat
chaine DID ert2 (8h)
sproket renthal (8h)
Forks Exxtreme MX revalve spec + Pro-Circuit National Tube (a-kit parts) + 0.49kg spring
Shock Exxtreme MX revalve + works piston (A-kit) + Rebound separator valve + Ti plate etc
rad valve boyeseen
fuel pump conversion plate from loudmouthMX
Welding done by a professionnal. Not issue in 38h of used.
I ask 8500$CAD and I live 30minutes from the Vermont border.
Black friday deal
Come with clean crf250r title
Make an offer
The Shop
The motor is a 2001. When the fram was completed I had all bearing, seal gasket, clutch etc etc change. The cylinder was redone by millenium last spring and has 8hours on it. I did most of the machning but gave the welding to a professional that I meet during a professionnal job. He's a extremely well know welder in the area.
Some ex top rpovincial racer tried it and was impress by the final result.
I can put softer spring on it depending on your weighting. I ran that suspension on my 450 at the end of the season and the spring are for guy around 220lbs on this bike. It weight 212lbs full gas
I have th correct spring for you. I'll install it.
You can txt me at five1four-71seven-2four7five
Email: MachineRegime1@msn.com
Post a reply to: Honda CR250 AF 2014