I am no longer importing these

Related:
Create New Tag

8/18/2016 12:35 AM
Edited Date/Time: 12/5/2016 5:57 PM

NEW CMT carbon fiber fuel tanks, available for various Yamaha, Honda, Suzuki and Kawasaki models.

$967.50, shipping included inside US. Approximately $40 additional shipping to most countries outside the US.

PayPal or credit card payment accepted.

I can be reached at socalblackdiamond@gmail.com or you can call me at 949.214.6451 to insure order accuracy.

This part is available for the following models:

Honda CR125R, 2002-2007 - 9.2L/2.43G capacity (1/3G larger than stock)

Honda CR250R, 2002-2007 - 9.2L/2.43G capacity (1/3G larger than stock)

Honda CRF250R, 2010-2013 - 6.2L/1.63G capacity or slightly larger 7.3L/1.93G capacity.

Honda CRF450R, 2009-2012 - 6.2L/1.63G capacity or slightly larger 7.3L/1.93G capacity.

Honda CRF250R, 2014-2017 - 7.9L/2.1G capacity or slightly larger 8.4L/2.2G capacity.

Honda CRF450R, 2013-2016 - 7.9L/2.1G capacity or slightly larger 8.4L/2.2G capacity.

Kawasaki KXF450, 2016-2017 - 7.0L/1.85G capacity (1/4G larger than stock)

Yamaha YZF 450, 2014-2017 - 8L/2.11G capacity or slightly larger 10L/2.64G capacity.

Yamaha YZF 250, 2014-2017 - 8L/2.11G capacity or slightly larger 10L/2.64G capacity.

Yamaha YZ125 two stroke, 2006-2017 - 8.5L/2.5G capacity.

Yamaha YZ250 two stroke, 2006-2017 - 8.5L/2.5G capacity.

Suzuki RMZ250, 2010-2017 - 7.3L/1.93G capacity.

These carbon fiber parts are the exact parts manufactured for many of the top factory motocross teams in the AMA Nationals, Monster Energy Supercross and MXGP series.

Made with a 4 layer of epoxy matrix pre-preg carbon Hexcel Hexply M49 600g/sqm (the same carbon fiber used in many race car chassis)

This process utilizes 1 layer of epoxy matrix pre-preg carbon Hexcel Hexply M52 200g/sqm (high quality cosmetic finish carbon fiber) made with a polymerization process in autoclave to ensure maximum strength while at the same time producing the absolute lowest weight part possible.

The gloss surface finish is obtained by polishing the resin, not by utilizing transparent paint or a clear-coat like some of the competitors’ products. Every piece is hand-finished by skilled technicians to ensure you are getting the highest quality carbon fiber race parts available today.

Average weight reduction of approximately 350 grams/.75 lbs compared to the stock tank on most models.

* Please Note: These parts are built to order and delivery time is 7-10 business days.

Photo

Photo

Photo

Photo

Photo

Photo

Photo

|

8/18/2016 11:31 AM

Man I've been eye balling these tanks for a while now for my CR 250 but just can't justify $1k for one though, but sure are badass

|

Instagram: rider_122

8/18/2016 11:40 AM

I have a blemished one coming back today that has a few tiny chips on the bottom (you cant see them when the tank is installed)

After I evaluate the damage I will let you know but I will probably sell the damaged one for around $450.

|

8/18/2016 11:51 AM

blackdiamond wrote:

I have a blemished one coming back today that has a few tiny chips on the bottom (you cant see them when the tank is ...more

Fantastic I am for sure interested

|

Instagram: rider_122

8/18/2016 12:13 PM

I will have some pics for you later today

|

8/18/2016 2:27 PM

blackdiamond wrote:

I have a blemished one coming back today that has a few tiny chips on the bottom (you cant see them when the tank is ...more

Damn good deal right there !

|

8/18/2016 2:35 PM

blackdiamond wrote:

I have a blemished one coming back today that has a few tiny chips on the bottom (you cant see them when the tank is ...more

Rider_122 wrote:

Fantastic I am for sure interested

Email me directly and I will send you some pics

socalblackdiamond@gmail.com

|

9/9/2016 12:54 AM

Finally had a chance to get my hands on one of the new CMT Yamaha 2 stroke tanks. Pretty sweet part, the last pic is what it looks like installed on Vital member Marty Begell's bad ass 2010 YZ250.

Personally, I think this is the best looking tank CMT makes once its installed on the bike.

Photo

Photo

Photo

|

9/9/2016 5:34 AM

blackdiamond wrote:

Finally had a chance to get my hands on one of the new CMT Yamaha 2 stroke tanks. Pretty sweet part, the last pic is what it ...more

Do you get the choice of gas cap colors for each different bike? And flush cap or regular cap tank? , I left you a message also. Thanks billy

|

9/9/2016 10:07 AM

Yes

|

9/9/2016 6:47 PM

No KTM? If you make them for the 16+ I will buy one.

|

9/9/2016 9:23 PM

davbrucas wrote:

No KTM? If you make them for the 16+ I will buy one.

For some reason they do not make them for the KTM's

|

9/10/2016 2:45 PM

Damn I want a YZ250 one!!

|

9/10/2016 6:12 PM

They are cool tanks! Great quality too

Photo

|

Instagram: rider_122

10/11/2016 6:50 PM

Bump

|

10/11/2016 9:27 PM

These are the real deal folks. Black Diamond hooked a Vitard up (as he has on other stuff, too, thanks buddy!).

Can't speak highly enough of his products, knowledge and service. Would buy again in a NY minute.

Photo

|

Thanks for the memories and good fellowship guys!

10/12/2016 10:35 AM

If you ever get another one going cheap with an unseen aesthetic fault, for a cr125/250 like you had before not too long ago, drop me a pm.

|

10/12/2016 10:53 AM

barkhard696 wrote:

These are the real deal folks. Black Diamond hooked a Vitard up (as he has on other stuff, too, thanks buddy!).

Can't speak ...more

Thanks brother, glad to help. Your CR is lookin' sano!

|

10/12/2016 10:57 AM

Empty Pockets wrote:

If you ever get another one going cheap with an unseen aesthetic fault, for a cr125/250 like you had before not too long ago, ...more

Ok, will do

|

10/12/2016 1:56 PM

Thanks.

|

10/12/2016 7:17 PM

barkhard696 wrote:

These are the real deal folks. Black Diamond hooked a Vitard up (as he has on other stuff, too, thanks buddy!).

Can't speak ...more

Great look'n bike ! Hard to believe the bike is 10 year's old, non-moto people would think it's a new model, and the tank does justice to the 02-07 CR's. Question to BD, is it possible to get a tank without the vent ? and a cap with a vent ? My 06 250 wants to know.

|

There's something happening here, what it is ain't exactly clear.

10/12/2016 8:57 PM

ledger wrote:

Great look'n bike ! Hard to believe the bike is 10 year's old, non-moto people would think it's a new model, and the tank does ...more

I could make a one-off mod cap and put the vent in it for you. That would be pretty simple if that's what you want.

|

10/13/2016 9:27 AM

These are just sick.
Build quality is insane..Photo

|

10/13/2016 10:26 PM

blackdiamond wrote:

I could make a one-off mod cap and put the vent in it for you. That would be pretty simple if that's what you want.

Excellent, let me get a few duck's lined up and we'll get it done. Thank you.

|

There's something happening here, what it is ain't exactly clear.

11/13/2016 12:09 PM
Edited Date/Time: 11/29/2016 10:36 AM

Bump 2.0

|

11/29/2016 10:36 AM

Bump 3.0

|

11/29/2016 4:51 PM

If you come across a damaged Yz 250 tank let me know.!

|

11/29/2016 5:02 PM

JWACK wrote:

If you come across a damaged Yz 250 tank let me know.!

Ok, will do.

|

11/29/2016 5:06 PM

JWACK wrote:

If you come across a damaged Yz 250 tank let me know.!

blackdiamond wrote:

Ok, will do.

Thank you.

|

11/29/2016 6:00 PM

JWACK wrote:

If you come across a damaged Yz 250 tank let me know.!

blackdiamond wrote:

Ok, will do.

Same thing for a '14 CRF250R

|