want to put a set of 2010 yamaha sss forks on a 2001 yz250, what do i need to do with the triple clamps and stem?
want to put a set of 2010 yamaha sss forks on a 2001 yz250, what do i need to do with the triple clamps and stem?
Edited Date/Time:
Need 04+ clamps and swap the stem. Then you'll need either a tusk wheel or a wheel and axle from the newer bikes
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
mattyhamz2 wrote:
Need 04+ clamps and swap the stem. Then you'll need either a tusk wheel or a wheel and axle from the newer bikes
thanks man
mattyhamz2 wrote:
Need 04+ clamps and swap the stem. Then you'll need either a tusk wheel or a wheel and axle from the newer bikes
oldandslow1 wrote:
thanks man
No problem! Here’s a pic of my 98 I did
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals