showa steering stablizer on xtrig rocs clamps

jaketiernan298
Edited Date/Time 3/31/2018 11:47am
Has anybody ever done this?? If you have I was wondering if you could post photos. Thanks!
|
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 3/31/2018 8:32am
3/31/2018 8:32am
I have the Showa on my KTM with Xtrigs. For KTM we use the ride engineering kit. It has nothing to do with the clamps.

Not sure what bike you’re trying to install on?
jaketiernan298 3/31/2018 10:04am
3/31/2018 10:04am
CarlinoJoeVideo wrote:
I have the Showa on my KTM with Xtrigs. For KTM we use the ride engineering kit. It has nothing to do with the clamps. Not...
I have the Showa on my KTM with Xtrigs. For KTM we use the ride engineering kit. It has nothing to do with the clamps.

Not sure what bike you’re trying to install on?
A Kawasaki. Really?! I thought there had to be a threaded bracket on the bottom clamp?
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 3/31/2018 11:47am
3/31/2018 11:47am
I just read the fine print (Showa damper sold separately. Note: 1) This kit is designed to work in conjunction with Ride Eng. KX triple clamps. 2) Ignition box must be relocated.)

The Shop

See All »
jaketiernan298 4/1/2018 7:38pm
4/1/2018 7:38pm
CarlinoJoeVideo wrote:
I just read the fine print [i](Showa damper sold separately. Note: 1) This kit is designed to work in conjunction with Ride Eng. KX triple clamps...
I just read the fine print (Showa damper sold separately. Note: 1) This kit is designed to work in conjunction with Ride Eng. KX triple clamps. 2) Ignition box must be relocated.)
whoops I completely didn't see that. I sent an email to RE asking where there placed the ecu. Thanks!
Slosh 112
Profile picture for user Slosh 112
Posts
1155
Joined
3/31/2014
Location
Mackay QLD AU
Slosh 112 4/1/2018 8:12pm
4/1/2018 8:12pm
CarlinoJoeVideo wrote:
For KTM this is the set up: [img]https://p.vitalmx.com/photos/forums/2018/03/31/252854/s1200_Screen_Shot_2018_03_31_at_11.43.33_AM.jpg[/img] Looks like they have one for a Kawi also: https://ride-engineering.com/products.php?d=1&p=bm&pn=KX-SHSB0-00&t=kx
For KTM this is the set up:


Looks like they have one for a Kawi also:
https://ride-engineering.com/products.php?d=1&p=bm&pn=KX-SHSB0-00&t=kx
Which HPSD did you go with? I have the 22mm one on my RM125 with no mods other than heavier oil so far, R E recommend the smaller one for MX, would have thought it would be the other way around?
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 4/1/2018 10:29pm
4/1/2018 10:29pm
CarlinoJoeVideo wrote:
For KTM this is the set up: [img]https://p.vitalmx.com/photos/forums/2018/03/31/252854/s1200_Screen_Shot_2018_03_31_at_11.43.33_AM.jpg[/img] Looks like they have one for a Kawi also: https://ride-engineering.com/products.php?d=1&p=bm&pn=KX-SHSB0-00&t=kx
For KTM this is the set up:


Looks like they have one for a Kawi also:
https://ride-engineering.com/products.php?d=1&p=bm&pn=KX-SHSB0-00&t=kx
Slosh 112 wrote:
Which HPSD did you go with? I have the 22mm one on my RM125 with no mods other than heavier oil so far, R E recommend...
Which HPSD did you go with? I have the 22mm one on my RM125 with no mods other than heavier oil so far, R E recommend the smaller one for MX, would have thought it would be the other way around?
I have ridden with both sizes and they are both revalved by Factory Connection. They Feel the same, I just like a bit of resistance for MX.

Post a reply to: showa steering stablizer on xtrig rocs clamps