show 47mm forks

Related:
Create New Tag

2/1/2019 10:10 AM

i am doing a fork rebuild on my rm 125s forks
i pulled one apart to find some rust where the bushings are and right above the dust seal

what should i do
just sand it down

|


Thanks to- Monster energy, Mika metals, DT-1 filters,Factory connection, works connection, factory effex,acerbis,O'Neal,Scott,Hann wheels,Maugra USA, Engine ice,Slick products,Leatt. Yes me sponsors are real.

2/1/2019 10:17 AM

Scotchbrite and WD-40.

|

2/1/2019 10:43 AM

thanks i will try that

|


Thanks to- Monster energy, Mika metals, DT-1 filters,Factory connection, works connection, factory effex,acerbis,O'Neal,Scott,Hann wheels,Maugra USA, Engine ice,Slick products,Leatt. Yes me sponsors are real.

2/1/2019 10:57 AM
Edited Date/Time: 2/1/2019 10:59 AM

The discoloration is not rust. And don't use scotchbrite on a fork tube

|

2/1/2019 11:16 AM
Edited Date/Time: 2/1/2019 11:17 AM

Hondas4Life3 wrote:

The discoloration is not rust. And don't use scotchbrite on a fork tube

Great suggestion. Very helpful...

A picture would help.

|

2/1/2019 11:21 PM

Make sure the inner cartidge seals are still good in those forks. In my experience those 47mm showas go through seals.

|