ktm sx250 2016 Neken bend?

Related:
Create New Tag

5/24/2018 6:00 AM

Hi can anyone confirm for me the Neken handlebar bend that comes standard on a 2016sx250 please?

Buying a new bike (yz) and felt really comfortable on that Neken bend bar but cannot find any info on what bend comes standard on the ktm 2016 model. Thanks in Advance!!!

|

5/24/2018 7:21 AM
Edited Date/Time: 5/24/2018 7:22 AM

Just buy a set of new take offs from Ebay. Several sellers sell new KTM neken bars for around 50$.

|

5/24/2018 8:28 AM

Reece Gaffney wrote:

Hi can anyone confirm for me the Neken handlebar bend that comes standard on a 2016sx250 please?

Buying a new bike (yz) and ...more

I got my set off my 18 150SX never used I'll for $60 plus shipping with the lock on grip if you need it. Robinmac82@yahoo.com

|

5/24/2018 10:11 AM

I like bars that are low & not huge backsweep and they are similar. I usually buy a Carmichael, Stewart or pastrana (Race low) type bar.

|

5/24/2018 11:13 AM

|

5/25/2018 12:29 AM

It's the same as a Renthal 821 fatbar, Renthal 999 twinwall. The ODI mcgrath bend is also pretty close

|

5/25/2018 2:33 AM

The measurements for 2016-2018 KTM handlebars are 816, 79, 52mm.

|

5/25/2018 6:42 AM

aees,

Did you get this from the Neken site? Thanks!

|

5/25/2018 8:29 AM

Comparing measurement charts from one company to another doesn't always work. They measure in different ways.

|

Take it to the limit, one more time!

5/25/2018 3:15 PM
Edited Date/Time: 5/25/2018 3:15 PM

djd wrote:

It's the same as a Renthal 821 fatbar, Renthal 999 twinwall. The ODI mcgrath bend is also pretty close

The 999 Twinwall is very close, but are a touch higher. I have pro taper RC bend on my two strokes, and while very similar, the RC bend is a pinch lower and has a hair more back sweep. The OEM bar that came on my KTM is probably the most comfy bar bend I have felt...

|

Tomac and/or Anderson for 2020.....