cleaning up a yoshi rs4 silencer

Related:
Create New Tag

9/13/2017 12:34 PM

What has anyone here done to get a their yoshi rs4 silencer clean. I thought cleaning it like my frame with scotch brite and wd40 would work, however than has done absoultely nothing.

|

I don't crash, I just run out of talent

9/13/2017 1:49 PM

I always scrub mine with Simple Green and a Green Scotch Brite pad and looks really good.

|

9/13/2017 6:26 PM

Stainless, correct?

Green scotchbrite, soapy water, and elbow grease.

Quick scrubbing with the grain of the metal.

|

If you're not mixing gas, you're not haulin ass.

9/14/2017 5:08 AM

TrailDigger wrote:

Stainless, correct?

Green scotchbrite, soapy water, and elbow grease.

Quick scrubbing with the grain of the metal.

yes it is stainless. I ran one mud race recently and now it has a couple stains burnt into it. I have scrubbed this thing to all hell and they are still there. My next step is probably trying to wet sand it.

|

I don't crash, I just run out of talent

9/23/2017 12:59 PM

Yoshimura will refurbish your can if it is in bad condition but, if you are looking for a trick look use stainless steel polish and a buff wheel. The trusty Mothers Mag Wheel cleaner works well but be careful as to this can leave white stains if you splash and don't whipe it up.

|