Posts
492
Joined
10/2/2016
Location
Decatur, AL
US
Edited Date/Time
12/19/2021 5:39am
This is my first rodeo with I guess a universal pipe amongst the 3 Austrian bikes. Ordered this full yoshimura rs12 off Motorsport with my machine selected(2022 gas gas mc350) I believe it’s the same pipe for the ktm and husky 350 as well. Anyways, the pipe comes stripped of any rubber fittings but has a bag full of random fittings and grommets. Some plastic and some rubber. and I can’t figure out how any of these work. The front mount hole is an oval and the rear is a circle. I looked at the stock pipe and the rubber sleeves are in there pretty tight with the outside washers placed in them. Am I suppose to swap those from the factory pipe to this one? Every pipe I ordered for my Kawi’s came either rubber fitted or just hard mounted. Anyone have some insight on how to bolt this thing up? Thanks
The Shop
https://docs.yoshimura-rd.com/262530S320.pdf
You are missing the step where you add the adapter. You need to install before putting the header on the bike.
Fair play to yosh though, in 20 years of riding, their pipe was the only one I've bought that fit perfectly.
Post a reply to: Yosh RS12 install 2022 GasGas Mc350