Yammi Ti spring on an SXF

red_leader
Profile picture for user red_leader
Posts
247
Joined
3/6/2018
Location
Redondo Beach, CA US
red_leader
Edited Date/Time 5/21/2018 2:46pm
It fits! Barely.
Stock spring 2 lb 13 oz
Ti 2 lb 5 oz.
Haven't tried it yet, might be a little stiff.

|
YZed250
Profile picture for user YZed250
Posts
1053
Joined
11/9/2014
Location
Costa Mesa, CA US
YZed250 5/21/2018 2:03pm
5/21/2018 2:03pm
Report back on how the stock YZ spring works on the KTM. Thanks for sharing!
red_leader
Profile picture for user red_leader
Posts
247
Joined
3/6/2018
Location
Redondo Beach, CA US
red_leader 5/21/2018 2:46pm
5/21/2018 2:46pm
felt good, sag was fine.
Driving out of corners with my ass on the seat, through chop definitely felt harsher than stock.
Kicked the spine harder.
I think it's because the spring rate is too stiff for me. Went from stock 42 to about a 48 (4.9 kg/mm in yammi speak) I want a 45.
Does anyone have a 4.7 yammi ti I can try? Smile

Post a reply to: Yammi Ti spring on an SXF