Forum Main Tech Help/Race Shop Yammi Ti spring on an SXF

Yammi Ti spring on an SXF

Related:
Edit Tags Done
Create New Tag
Edit Tags Done

red_leader

Vital MX member red_leader 62495 red_leader /images/default/avatar/c50.png https://www.vitalmx.com/community/red-leader,62495/all 03/06/18 34 150

Posts: 184

Joined: 3/6/2018

Location: Redondo Beach, CA USA

5/14/2018 11:00 PM

It fits! Barely.
Stock spring 2 lb 13 oz
Ti 2 lb 5 oz.
Haven't tried it yet, might be a little stiff.

Photo

|

YZed250

Vital MX member YZed250 44958 YZed250 https://p.vitalmx.com/photos/users/44958/avatar/c50_131777810_10219361449930537_7510542833555652488_o_1610134481.jpg?1610134107 https://www.vitalmx.com/community/YZed250,44958/all 11/09/14 49 522 125 1 1

Posts: 571

Joined: 11/9/2014

Location: Costa Mesa, CA USA

5/21/2018 2:03 PM

Report back on how the stock YZ spring works on the KTM. Thanks for sharing!

|

KTM250SX YZ125 YZ85 PW80 ZX6 FZX700

red_leader

Vital MX member red_leader 62495 red_leader /images/default/avatar/c50.png https://www.vitalmx.com/community/red-leader,62495/all 03/06/18 34 150

Posts: 184

Joined: 3/6/2018

Location: Redondo Beach, CA USA

5/21/2018 2:46 PM

felt good, sag was fine.
Driving out of corners with my ass on the seat, through chop definitely felt harsher than stock.
Kicked the spine harder.
I think it's because the spring rate is too stiff for me. Went from stock 42 to about a 48 (4.9 kg/mm in yammi speak) I want a 45.
Does anyone have a 4.7 yammi ti I can try? smile

|
Forum Main Tech Help/Race Shop Yammi Ti spring on an SXF

The Latest