Posts
324
Joined
1/21/2017
Location
IN
US
DaBaum44
1/19/2018 6:17pm
1/19/2018 6:17pm
Edited Date/Time
4/1/2018 11:03am
I recently installed a new set of Cycra Powerflow shrouds on my 2017 YZ250F, and I gotta say the bike looks much better! However, I feel like the fitment is poor. I really struggled to get the bolt holes on the airbox cover to line up properly. I am referring to the allen bolts that screw into the clips provided by Cycra, which replace the stock Dzus fasteners.
Does anyone have advice or suggestions in making the airbox holes line up easier? Will it help if I try to slide the clips back to make the holes line up? Thanks.
**EDIT** With the advice below from c0ncEpt and after using these for a few hours, I'm now a big fan of these Cycra shrouds. They provide a much better feel on the bike and allow for easier access to the airbox. I have the version with the built in screens and the airbox seems to stay cleaner compared to stock.
Does anyone have advice or suggestions in making the airbox holes line up easier? Will it help if I try to slide the clips back to make the holes line up? Thanks.
**EDIT** With the advice below from c0ncEpt and after using these for a few hours, I'm now a big fan of these Cycra shrouds. They provide a much better feel on the bike and allow for easier access to the airbox. I have the version with the built in screens and the airbox seems to stay cleaner compared to stock.
Post a reply to: 14-18 YZ250F Cycra Shroud Fitment