YZ250 Brembo master cylinder

Shezzy557
Profile picture for user Shezzy557
Posts
24
Joined
10/31/2017
Location
AU
Shezzy557
Looking to put a Brembo front mc on my 2005 yz250. Have read multiple posts on here of people completing this conversion with great success. Although I can't find anything definite on what years/models work on the yz and what don't.
Surely its not just a case blindly pulling the trigger on which ever one I like the look of on Ebay???
|
Kristen_Valentino 5/27/2019 7:30am
5/27/2019 7:30am
I put a used 250sxf unit on, along with caliper, just had to use oem ktm caliper bracket, centered it on rotor, plugged one hole and drilled and tapped another, not to bad
4One7
Profile picture for user 4One7
Posts
67
Joined
12/6/2016
Location
Parkton, NC US
Fantasy
2611th
4One7 5/27/2019 7:22pm
5/27/2019 7:22pm
Shezzy557 wrote:
Looking to put a Brembo front mc on my 2005 yz250. Have read multiple posts on here of people completing this conversion with great success. Although...
Looking to put a Brembo front mc on my 2005 yz250. Have read multiple posts on here of people completing this conversion with great success. Although I can't find anything definite on what years/models work on the yz and what don't.
Surely its not just a case blindly pulling the trigger on which ever one I like the look of on Ebay???
Any master cylinder from early 2000's and up ktm will work. Use the stock YZ line with the brembo banjo bolts on the MC. Part number 54813001200 is one of the more common ktm master cylinders used.

Post a reply to: YZ250 Brembo master cylinder