Posts
449
Joined
2/25/2018
Location
GB
deccr250
12/30/2018 11:36am
12/30/2018 11:36am
Edited Date/Time
12/30/2018 4:17pm
Hey guys,
Currently building a 2004 YZ250 and I’ve done the SSS fork conversion.
I’m using 2009 YZF250 forks and front axle, and 2004 YZ250 Pro Circuit triple clamps.
Decided to test fit my new wheels today, (YZF250 front, YZ250 Rear) everything lines up fine on the caliper etc but I have a gap between the fork foot and the spacer.
Am I missing something here? I was under the impression that the 2004 triples would work fine with the SSS forks...I’ve added a picture below.
Any help/advice is appreciated, cheers!
Currently building a 2004 YZ250 and I’ve done the SSS fork conversion.
I’m using 2009 YZF250 forks and front axle, and 2004 YZ250 Pro Circuit triple clamps.
Decided to test fit my new wheels today, (YZF250 front, YZ250 Rear) everything lines up fine on the caliper etc but I have a gap between the fork foot and the spacer.
Am I missing something here? I was under the impression that the 2004 triples would work fine with the SSS forks...I’ve added a picture below.
Any help/advice is appreciated, cheers!
Post a reply to: YZ/YZF Wheel spacer problem?