YZ/YZF Wheel spacer problem?

Create New Tag

12/30/2018 11:36 AM
Edited Date/Time: 12/30/2018 4:17 PM

Hey guys,
Currently building a 2004 YZ250 and I’ve done the SSS fork conversion.
I’m using 2009 YZF250 forks and front axle, and 2004 YZ250 Pro Circuit triple clamps.
Decided to test fit my new wheels today, (YZF250 front, YZ250 Rear) everything lines up fine on the caliper etc but I have a gap between the fork foot and the spacer.
Am I missing something here? I was under the impression that the 2004 triples would work fine with the SSS forks...I’ve added a picture below.
Any help/advice is appreciated, cheers! smile



12/31/2018 8:49 AM

That is normal. The thicker part of the axle is wider than the fork lug.