Posts: 108
Joined: 11/17/2014
Location: GBR
Hi all,
Had a big off last weekend and have bent my 7/8th Renthal Bars, so I'm now looking to fit Twinwalls using the
06 clamps/ bar mounts I've had sitting around for a while.
Can I ask if these will fit my 05 forks/ what is needed?
Cheers,
Jordan
Posts: 1087
Joined: 2/7/2007
Location: El Dorado Hills, CA USA
I run 2006 forks on my 2005 yz125. They slid right in. You're good to go if you swap the clamps.
Posts: 108
Joined: 11/17/2014
Location: GBR
RyanLester761 wrote:I run 2006 forks on my 2005 yz125. They slid right in. You're good to go if you swap the clamps.
And wheels spacers etc.. Heard that's an issue, but no one has been able to give me any more info..
Posts: 1087
Joined: 2/7/2007
Location: El Dorado Hills, CA USA
Posts: 1087
Joined: 2/7/2007
Location: El Dorado Hills, CA USA
Posts: 9380
Joined: 7/6/2015
Location: So Cal, CA USA
Everything will mount up fine. Only difference is the top clamp has the removable mounts in 06 and the color of the clamps. Everything else is the same.
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
Posts: 1087
Joined: 2/7/2007
Location: El Dorado Hills, CA USA
Edited Date/Time:
mattyhamz2 wrote:Everything will mount up fine. Only difference is the top clamp has the removable mounts in 06 and the color of the clamps. ...more
That's right! Correct me if I'm wrong, but the 2006 clamps went wider- in which case, the wheel spacers would be needed. The outer tube fork diameters are the same.
Posts: 9380
Joined: 7/6/2015
Location: So Cal, CA USA
mattyhamz2 wrote:Everything will mount up fine. Only difference is the top clamp has the removable mounts in 06 and the color of the clamps. ...more
RyanLester761 wrote:That's right! Correct me if I'm wrong, but the 2006 clamps went wider- in which case, the wheel spacers would be needed. The ...more
I believe it was 2008. I have a 98 with 07 250f clamps and 05 forks and I didn't have to change spacers or anything else. Same with my 05 yz250. Switched to an 06 upper clamp and everything fit perfect
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
