Wp cone Valve and Brembo on a Honda?

Related:
Create New Tag

1/23/2019 8:43 AM

i was wondering if I buy a set of Wp cone valve forks from a Ktm and get some triple Clamps that fit them to my 450 if that will aloow me to run a front brembo brake set up?

|

1/23/2019 8:51 AM

Garrett_Gustafson wrote:

i was wondering if I buy a set of Wp cone valve forks from a Ktm and get some triple Clamps that fit them to my 450 if that ...more

If you get clamps to work, you could use the whole KTM front end with the Brembo setup. Figure out the forks offset and have the clamps made to put you back to stock offset if you like the way it handles. Seems like a lot of money will be spent though unless you already have the forks.

|

Take it to the limit, one more time!

1/23/2019 9:06 AM

hey thanks for the reply yea it would be a lot of money i was just wondering if it would be possible. im looking to switch up the suspension and was wondering if that was an option

|

1/23/2019 11:06 PM

You can get WP Cone Valve forks that are made for the Honda. I think i actually saw a set or two of them in the sale section on Vital a few days ago.

|

Current fleet of two wheeled vehicles:
- KTM SX 250 2020
- Suzuki GSX-R 600 K7 track spec
- Canyon Sender CF 8.0 2018 Downhill
- Canyon Spectral:ON 7.0 2019 EMTB
- White GX Pro 20 Gravel

1/24/2019 3:43 AM

Garrett_Gustafson wrote:

i was wondering if I buy a set of Wp cone valve forks from a Ktm and get some triple Clamps that fit them to my 450 if that ...more

I have a set of CVs with custom 21mm offset triple clamps for your honda and could get you a brake adapter for brembo caliper if need be.
Contact me through PM if you're interested. Forks are flawless and priced reasonably.

|

1/25/2019 10:32 AM

Garrett_Gustafson wrote:

i was wondering if I buy a set of Wp cone valve forks from a Ktm and get some triple Clamps that fit them to my 450 if that ...more

Turbojez wrote:

I have a set of CVs with custom 21mm offset triple clamps for your honda and could get you a brake adapter for brembo caliper ...more

i maybe be interested later on down the road i got 2 yz125s and a mule and a xr100r that all need building but if you still have them when i have the cash ill let you know

|