What is the best way to fix this?

Create New Tag

4/27/2020 2:42 PM

Does it need cut off and a new piece made and welded on? Can I fill it with weld and grind it smooth? Would using a brazing rod instead of weld be a bad idea? Is it fine as is? It’s not wore through yet. How would you guys fix it?

4/27/2020 3:23 PM

Aluminum, bring to aluminum welder. Then replace chain buffer before it happens again.


4/28/2020 4:01 PM

I would check eBay for one.


Take it to the limit, one more time!

4/28/2020 9:29 PM

as long as it is not in the bore...a welder can fill it up ...watching the heat...file down ...sand...and your good


4/29/2020 4:40 AM

If you have it welded be sure the welder understands that the bore is a bearing press and cannot change size. If the bearing has to much when the welding is done it will prematurely wear or not rotate smoothly.


4/29/2020 4:42 PM

Have the welder preheat the swingarm to 300 degrees F and fill the slots. easy repair.