Posts
224
Joined
8/16/2017
Location
GB
Hello
Few months ago I posted about my bike not starting with the vortex on my 2019 ktm 250sxf well I decided I wanted a new bike so I now have a 2021 FC 250 and it’s doing the same, this vortex has been back to Evotech here in the UK and it started perfectly fine on another bike so I’m really confused to why it’s doing this
Starts up perfectly fine with the stock ECU. Do I have to change the idle screw or cold start with more turns or less for the vortex ? Obviously something I’m doing isn’t helping.
I did set the TPS by holding the buttons down etc.
I’m really puzzled with it now.
Few months ago I posted about my bike not starting with the vortex on my 2019 ktm 250sxf well I decided I wanted a new bike so I now have a 2021 FC 250 and it’s doing the same, this vortex has been back to Evotech here in the UK and it started perfectly fine on another bike so I’m really confused to why it’s doing this
Starts up perfectly fine with the stock ECU. Do I have to change the idle screw or cold start with more turns or less for the vortex ? Obviously something I’m doing isn’t helping.
I did set the TPS by holding the buttons down etc.
I’m really puzzled with it now.
Post a reply to: Vortex ignition won’t fire up on brand new FC250