Vintage/Evo bike footpegs - anyone make weld on bracket/peg kits?

Create New Tag

9/3/2018 8:21 PM

Pegs on my new to me 1987 KX250 are trashed. The left side is bolt on but the right is welded on. Does anyone offer a weld on kind of universal bracket that will work with a modern wide footpeg?


Ride like a girl!!!
2016 KTM 500 EXC-F
Current project: 2007 Kawasaki KX250-R7 retro build
Current project #2: 1987 Kawasaki KX250-E1 rider/racer resto
1989 KX125 resto
1987 RM250 resto

9/4/2018 9:51 AM

Try " works connection".

Paw Paw


9/5/2018 4:22 AM

If your talking the brct on the frame that holds the pegs.....I have never seen a kit that converts to use of newer pegs. Search a few Vintage KX builds, it's common to rebuild the mount brcts to correct the worn out mounts. A good welder can do this for you. Not sure about the 87"s but IMS makes wider pegs for the K5 that may work..


9/5/2018 6:27 PM
Edited Date/Time: 9/5/2018 6:28 PM

Beyond welding on new brackets, here are some from IMS. The 1987 KX250 pegs are the same as the 87 KDX200 pegs part number, so I assume these would work.

This Kawasaki 34028-1173 STEP,LH Not Available fits the following models and components:

Kawasaki Motorcycle 1986 KDX200 - KDX200-C1 FOOTRESTS

Kawasaki Motorcycle 1986 KX125 - KX125-E1 FOOTRESTS

Kawasaki Motorcycle 1986 KX500 - KX500-B2 FOOTRESTS

Kawasaki Motorcycle 1986 KX250 - KX250-D2 FOOTRESTS

Kawasaki Motorcycle 1987 KDX200 - KDX200-C2 FOOTRESTS

Kawasaki Motorcycle 1987 KX125 - KX125-E2 FOOTRESTS

Kawasaki Motorcycle 1987 KX250 - KX250-E1 FOOTRESTS

Kawasaki Motorcycle 1987 KX500 - KX500-C1 FOOTRESTS