Posts: 11
Joined: 3/21/2018
Location: Wells, MN USA
I wanted to get a pro circuit works pipe for my 2003 yz 125, but they don't make them. I looked everywhere and they only had the platinum pipe, so i got it. But i heard you can take the chrome finish somehow and it will look like the works pipe. Let me know if there is anything like that. Thanks!
Posts: 455
Joined: 12/12/2016
Location: CO, USA
You can take the chrome off. Find a local plating company, they'll have a process to remove chrome (Really nasty chemicals).
Posts: 2230
Joined: 8/5/2015
Location: POL
LumpDog841 wrote:You can take the chrome off. Find a local plating company, they'll have a process to remove chrome (Really nasty chemicals).
After that, you go over the whole pipe with sand paper and wd40, then hit the welds with torch and voila!
Posts: 2417
Joined: 3/18/2016
Location: CA, USA
If you can find someone local that would be ideal. If not, these guys do some good work at a reasonable price. I haven't needed their services as of yet, but know people who have used them with great results & come highly recommended.
https://www.piperepair.com/
Speak softly and carry a big stick.
Posts: 415
Joined: 11/7/2015
Location: Roseville, CA USA
They don’t make em anymore but 2000-2004 pc works pipes for the YZs all interchange, despite the different part numbers. They are out there, I just found a nos works pipe
Posts: 1474
Joined: 5/9/2011
Location: AUS
Give this thread a read, has a description on how to do it yourself https://m.vitalmx.com/forums/Moto-Related,20/FMF-Factory-Fatty-RM250,1309636
