Edited Date/Time:
24mx has the Twenty Ti footpegs on a discounted price, 99€. That is a really low price for Ti pegs, i think that i'm going to buy a set. Does anyone have experience with these Ti pegs?
|
Quote
Twenty Titanium footpegs
Posts: 9023
Joined: 1/4/2014
Location: FIN
Posts: 2487
Joined: 10/5/2012
Location: GBR
Motofinne wrote:
24mx has the Twenty Ti footpegs on a discounted price, 99€. That is a really low price for Ti pegs, i think that i'm going to buy a set. Does anyone have experience with these Ti pegs?
Had a set on my YZ125, wide, sharp & light. The only thing I noticed was one of my pegs didn't lay as flat as I liked so I ground a piece off where it touches the frame.
|
Quote
Posts: 2
Joined: 6/8/2012
Location: FIN
Hi long time lurker first time poster here. I have those pegs in my 2013 450 ktm and i like them.
Had to file that frame touching part also to get right angle but after that they are good.
And i bought 10mm offset model so the distance to levers stays about same as stock...
|
Quote
Posts: 9023
Joined: 1/4/2014
Location: FIN
Okay, i read that same thing somewhere else probably a year ago. I guess it's just a design fault then? I should have them later next week, i'll post an update if i also have to file mine down!
|
Quote
Posts: 66
Joined: 2/12/2014
Location: CAN
I would love to try them, I just sent them an email and they only ship to the following countries:
Bulgaria
Czech Republic
Estonia
Greece
Hungary
Latvia
Lithuania
Luxembourg
Portugal
Romania
Slovakia
Slovenia
That is strange... never seen a store that ships to 12 countries only.
|
Quote
Posts: 9023
Joined: 1/4/2014
Location: FIN
electrolabs wrote:
I would love to try them, I just sent them an email and they only ship to the following countries:
Bulgaria
Czech Republic
Estonia
Greece
Hungary
Latvia
Lithuania
Luxembourg
Portugal
Romania
Slovakia
Slovenia
That is strange... never seen a store that ships to 12 countries only.
That sounds strange. Are you sure that you sent to the right company? It's a Swedish company that is like a European BTO Sports or RMATVMC.
https://www.24mx.co.uk/info/about
|
Quote
Posts: 66
Joined: 2/12/2014
Location: CAN
Edited Date/Time:
Yes, it's the right company, email I got is info@24mx.com.
24mx.co.uk only ships to uk at checkout.
I'll take my business elsewhere.
|
Quote
Posts: 561
Joined: 12/17/2010
Location: LAGONISI, GRC
Posts: 819
Joined: 1/1/2018
Location: St. Petersburg, FL USA
I want to order a set too but I live in the USA as well 
Anyone over there want to help a fellow member out.... :-)
|
Quote
Posts: 9023
Joined: 1/4/2014
Location: FIN
Edited Date/Time:
Yep, the same problem for me. The left peg is not level, i'll have to grind it down a bit. But that is no big deal in my opinion. 99€ for Ti pegs is a steal.
|
Quote
Posts: 9023
Joined: 1/4/2014
Location: FIN
This is probably the best 99€ that i have ever spent. The grip is amazing, i will never ride with stock pegs again.
|
Quote
Posts: 2487
Joined: 10/5/2012
Location: GBR
Posts: 819
Joined: 1/1/2018
Location: St. Petersburg, FL USA
Posts: 617
Joined: 6/26/2014
Location: Southern MD, MD USA
Motofinne wrote:
24mx has the Twenty Ti footpegs on a discounted price, 99€. That is a really low price for Ti pegs, i think that i'm going to buy a set. Does anyone have experience with these Ti pegs?
Muscle-Milk-KTM wrote:
Had a set on my YZ125, wide, sharp & light. The only thing I noticed was one of my pegs didn't lay as flat as I liked so I ground a piece off where it touches the frame.
What part of the footpegs did you file down to get it to sit level? Mine are a little off as well.
|
Quote
Posts: 2487
Joined: 10/5/2012
Location: GBR
Motofinne wrote:
24mx has the Twenty Ti footpegs on a discounted price, 99€. That is a really low price for Ti pegs, i think that i'm going to buy a set. Does anyone have experience with these Ti pegs?
Muscle-Milk-KTM wrote:
Had a set on my YZ125, wide, sharp & light. The only thing I noticed was one of my pegs didn't lay as flat as I liked so I ground a piece off where it touches the frame.
Justin345 wrote:
What part of the footpegs did you file down to get it to sit level? Mine are a little off as well.
The part that sticks out & touches the frame, I used a bench grinder but do it little & often.
|
Quote
Posts: 30
Joined: 2/15/2016
Location: NLD
Edited Date/Time:
if people still needs product from europe, i can help you out from the netherlands.
send me a pb
|
Quote
Posts: 729
Joined: 1/11/2017
Location: CAN
Posts: 9023
Joined: 1/4/2014
Location: FIN
Posts: 2220
Joined: 8/5/2015
Location: POL
cdoggy81 wrote:
I want to order a set too but I live in the USA as well
Anyone over there want to help a fellow member out.... :-)
I ordered a set for myself and two US based Vital members.
If the ones you need are still available, I will be happy to help.
Not sure what the price is today, but during the black weekend they were 85EUR per set, I couldn't resist that kind of deal.
|
Quote
The Latest
-
-
-
-
@PING 1 -
-
-
-
-
-
Most Popular
-
-
-
-
@PING 1 -
-
-
-
-
-
-
-
- @cache_main: 0c369ce84597685a1b0f4326d7fcc6b5
