Technical touch KYB

BenC711
Profile picture for user BenC711
Posts
66
Joined
4/1/2018
Location
GB
BenC711
Happy Easter everyone!

I have managed to get a set of Technical Touch KYB a kit forks and shock for the right price. Only problem is they are from an RMZ 250 and I want to put them on my KXF250. Does anyone know if these will fit or what mods are needed?

If I can’t make them fit, then they will be up for sale
|
Motofinne
Profile picture for user Motofinne
Posts
10686
Joined
1/4/2014
Location
FI
Motofinne 4/1/2018 4:14am
4/1/2018 4:14am Edited Date/Time 4/1/2018 4:14am
I have no idea if they'll fit. I'm sure someone knows and you'll get an answer.

The thing i can contribute to is that you can get KXF lugs(from Technical Touch) for the forks and then they should fit if they fit the clamps on your KXF.
TrailDigger 4/1/2018 4:19am
4/1/2018 4:19am
You’d have to know what the center to center spacing it on either set of clamps. Easiest thing may be to run a Suzuki front wheel and caliper set up, assuming the clamps are the same spacing wise.
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 4/1/2018 4:52am
4/1/2018 4:52am
What year bikes are we talking? For a while kawasaki was actually making the rmz250. Even later years they were very similar bikes

The Shop

See All »
BenC711
Profile picture for user BenC711
Posts
66
Joined
4/1/2018
Location
GB
BenC711 4/1/2018 12:29pm
4/1/2018 12:29pm
Thanks for the replies folks, much appreciated!

The KXF is a 2018 and the suspension is off a 2017 RMZ250. 400 Euro for the lugs isn’t too bad but I want to see if they can be made to fit any other way first.

As far as I can see if I use my clamps and get them machined if necessary to fit these forks, surely it must just be down to the wheel spacers to get them to fit?

Post a reply to: Technical touch KYB