Spring rate opinions

57980 BirtDikes /images/default/avatar/c50.png https://www.vitalmx.com/community/BirtDikes,57980/all 06/04/17 1 17 55 1

Posts: 72

Joined: 6/4/2017

Location: FL, USA

7/30/2017 6:30 PM

At what weight/skill level should i change my spring rate in my 2016 yz250. I am 170-175lbs without gear, id assume around 180-185 with gear. Bike was revalved with stock springs and stock valving/shims when i first got it and feels good, but as i am getting faster and it does feel a little bit of a harsh impact on flat landing or over jumping. im at. around 7-8 clicks from full hard on compression (both forks and shock) Can not remember where im at on high speed comp. mostly riding mx, but occasionally ride some tighter tracks.

| Quote

mxb2

20799 mxb2 https://p.vitalmx.com/photos/users/20799/avatar/c50_IMG_20151127_132255925_1450107346.jpg?1450106842 https://www.vitalmx.com/community/mxb2,20799/all 06/15/10 34 https://www.vitalmx.com/community/mxb2,20799/setup 353 19742 149 1

Posts: 20095

Joined: 6/15/2010

Location: Bowie, MD USA

7/30/2017 6:56 PM

BirtDikes wrote:
At what weight/skill level should i change my spring rate in my 2016 yz250. I am 170-175lbs without gear, id assume around ...more

BirtDikes wrote:
At what weight/skill level should i change my spring rate in my 2016 yz250. I am 170-175lbs without gear, id assume around 180-185 with gear. Bike was revalved with stock springs and stock valving/shims when i first got it and feels good, but as i am getting faster and it does feel a little bit of a harsh impact on flat landing or over jumping. im at. around 7-8 clicks from full hard on compression (both forks and shock) Can not remember where im at on high speed comp. mostly riding mx, but occasionally ride some tighter tracks.

...more

Did you contact your suspension guy?

| Quote

BirtDikes