Was wondering if anyone has polished up there brake master cylinders , was thinking about giving it a go but want to know if ppl have done it and how they did it
|
Quote
Shinning up master cylinders
Posts: 207
Joined: 9/7/2017
Location: CAN
Posts: 931
Joined: 9/7/2012
Location: MA, USA
Friend tried it with soda blasting and then sanding/buffing with a dremel and polish. Was tedious but came out kinda okay. Eventually stopped and just scotchbrited it cause it got dirty and gross fast.
|
Quote
If you're not mixing gas, you're not haulin ass.
Posts: 51
Joined: 12/1/2016
Location: San Antonio, TX USA
^^^^^^^ Id stick to polishing levers, foot brake pedal, kick start, etc. polishing anything will require maintenance. The stock look is always clean.
|
Quote
Posts: 207
Joined: 9/7/2017
Location: CAN
Braden_Steinhour23 wrote:
^^^^^^^ Id stick to polishing levers, foot brake pedal, kick start, etc. polishing anything will require maintenance. The stock look is always clean.
Yea that's what I did ,amazing how shiny they get with a little steel wool lol
|
Quote
The Latest
Most Popular
- @cache_main: 7ecaaf121e145bf721d229bd042cb8f3
