Rmz 250 2014

LAF818
Profile picture for user LAF818
Posts
23
Joined
9/4/2020
Location
Van Nuys, CA US
LAF818
Put new top end for rmz 250 2014 adjusted the Valves to spec also set the timing right the bike turns on for 1 min revs good then turns off but starts again easily. What could be the issue?
|
RGaede
Profile picture for user RGaede
Posts
209
Joined
1/10/2014
Location
Albuquerque, NM US
RGaede 12/8/2020 10:48pm
12/8/2020 10:48pm
Make sure the tip over sensor is installed correctly. If i remember right on an rmz it's near the valve cover under the tank and could have inadvertently been removed and reinstalled with the arrow pointing down.
4
LAF818
Profile picture for user LAF818
Posts
23
Joined
9/4/2020
Location
Van Nuys, CA US
LAF818 12/9/2020 9:40am
12/9/2020 9:40am
RGaede wrote:
Make sure the tip over sensor is installed correctly. If i remember right on an rmz it's near the valve cover under the tank and could...
Make sure the tip over sensor is installed correctly. If i remember right on an rmz it's near the valve cover under the tank and could have inadvertently been removed and reinstalled with the arrow pointing down.
Just tried that right now and stayed on thank you so much really appreciate it 🤙🏽
2

Post a reply to: Rmz 250 2014