Rm 250 with rmz a kit fitment

werner822
Profile picture for user werner822
Posts
609
Joined
7/24/2017
Location
Sunman, IN US
werner822
I have a all original 05 rm 250 and I have a rg3 49mm kit fork and shock setup that’s currently at Enzo getting setup , that came off a 15 rmz 450 . I already have a rmz front wheel, axle and spacers and 49mm pc tripleclamps that I am having tabs welded on should be done this week. Do I need the rm steering stem in the rmz triple clamps to fit correctly?
|
Squishy501 1/14/2019 9:36am
1/14/2019 9:36am
I did this on my 2006 RM 250. I used the rmz clamps and the steering stem off the RM.

you have the rest it shouldnt be a problem once you do that!
werner822
Profile picture for user werner822
Posts
609
Joined
7/24/2017
Location
Sunman, IN US
werner822 1/14/2019 3:53pm
1/14/2019 3:53pm
Squishy501 wrote:
I did this on my 2006 RM 250. I used the rmz clamps and the steering stem off the RM. you have the rest it shouldnt...
I did this on my 2006 RM 250. I used the rmz clamps and the steering stem off the RM.

you have the rest it shouldnt be a problem once you do that!
Awesome thanks for the info !!

Post a reply to: Rm 250 with rmz a kit fitment