Posts: 369
Joined: 7/24/2017
Location: Sunman, IN USA
I have a all original 05 rm 250 and I have a rg3 49mm kit fork and shock setup that’s currently at Enzo getting setup , that came off a 15 rmz 450 . I already have a rmz front wheel, axle and spacers and 49mm pc tripleclamps that I am having tabs welded on should be done this week. Do I need the rm steering stem in the rmz triple clamps to fit correctly?
Posts: 36
Joined: 7/24/2017
Location: CAN
I did this on my 2006 RM 250. I used the rmz clamps and the steering stem off the RM.
you have the rest it shouldnt be a problem once you do that!
Posts: 369
Joined: 7/24/2017
Location: Sunman, IN USA
Squishy501 wrote:
I did this on my 2006 RM 250. I used the rmz clamps and the steering stem off the RM.
you have the rest it shouldnt be a problem once you do that!
Awesome thanks for the info !!
