Rm 125 bogging

nathuk
Profile picture for user nathuk
Posts
4
Joined
9/25/2017
Location
GB
nathuk
Hi I have just bought rm 125 1992 , its ticks over fine the problem is that when I release the clutch in the first gear it bogs out to the point where if I don't re engage the clutch it will cut out . This makes it un rideable. I have cleaned the carb out . Any suggestions ?
|
nathuk
Profile picture for user nathuk
Posts
4
Joined
9/25/2017
Location
GB
nathuk 9/25/2017 1:25pm
9/25/2017 1:25pm Edited Date/Time 9/25/2017 1:44pm
H
imoto34
Profile picture for user imoto34
Posts
3781
Joined
1/28/2010
Location
TN US
Fantasy
3179th
imoto34 9/25/2017 3:23pm
9/25/2017 3:23pm
Did you clean your jets out thoroughly? This is likely the problem. At times, you can see light thru the jet but it still is clogged.
nathuk
Profile picture for user nathuk
Posts
4
Joined
9/25/2017
Location
GB
nathuk 9/25/2017 3:53pm
9/25/2017 3:53pm
I fairly new to this . But I took the main jet out an sprayed cleaner through it . I then got a pin an made sure none of the little holes at the bottom of the main jet were blocked . But the jet itself just got carb cleaner sprayed through it
joeyburdette1985 9/26/2017 4:43pm
9/26/2017 4:43pm
Main jets dont have little holes at the bottom. Thats a pilot jet. If it idles fine im gonna say that circuit is fine. You have to check the main jet which is just one large hole.

Post a reply to: Rm 125 bogging