Posts: 39
Joined: 9/5/2008
Location: Cohoes, NY USA
My buddy’s CV forks are leaking oil. I’ve rebuilt a half dozen sets of forks but I can’t find any info like oil capacity or torque values for the CV’s. Anyone out there have any experience? FC says you need a special tool. He has all the parts and I would like to help him out.
Thanks
Mike
Posts: 1243
Joined: 7/23/2013
Location: Farmville, NC USA
You do need a special tool for the CV's!!
2020 YZ450F
2018 KTM 450SXF FE
2016 YZ250F 2008 CRF450R
2015 YZ250F 2008 CRF250R
2001 CR250R
2010 YZ250 2012 CRF150R
2009 YZ125 2010 KX109.5
SSR Motorsports Dealer YCF Motorcycles
TAGMX Suspension & Graphics! www.tagmxsuspension.com https://www.liquidskinzdesign.com/
Posts: 3610
Joined: 4/1/2008
Location: TN, USA
Pretty straight forward to replace seals except for unscrewing the seal holder with a strap wrench. Everything else is the same as most forks.
Take it to the limit, one more time!
Posts: 3610
Joined: 4/1/2008
Location: TN, USA
Take it to the limit, one more time!
Posts: 39
Joined: 9/5/2008
Location: Cohoes, NY USA
Thanks, I came across that manual last night after searching for an hour. Looks pretty basic. He did end up sending them out. Funny thing is only one side extends all the way after he took them off the bike.
