Removing Launch Control Button RMZ

Create New Tag

3/21/2018 10:35 AM

So i have a 2017 rmz250, and i have noticed on some pictures of other riders that they have either removed or relocated their, launch control/holeshot assist buttons from there handlebars. I honestly have never touched mine and would like to remove it or relocate it. Has anyone does this to their bike or know of any means of doing this? Thanks for the help! Cheers!


3/21/2018 6:38 PM

You just need a sharp knife and a cable the.


3/22/2018 1:01 AM

I've removed mine from my 15 RMZ450 as I didn't feel it made any improvement to my starts what so ever!

Remove the tank, then remove the launch control button and wire. Unplug it where it joins to the rest of the loom. I then sealed up the plug end at the loom really well and zip tied it out the way. De clutters the bars and saves a little weight too!