Recommend Old Style Flywheel Puller

KX500
Profile picture for user KX500
Posts
283
Joined
8/30/2018
Location
Chester, IL US
KX500
Picked up an on Suzuki TS250 to part out. Flywheel has the 3 threaded holes each about 120 degrees apart for removal use. So newer style puller (which I own about 6-8) isn't going to work.

So I need the old style slider type or something with the plate with 3 holes for the bolts to go thru & the one in the middle to push against the end of the crankshaft. Hope this make sense.

Anyway, what are you guys who work on old stuff using?
|
Paul_Pitzonka
Profile picture for user Paul_Pitzonka
Posts
694
Joined
5/1/2018
Location
Grand Terrace, CA US
Paul_Pitzonka 3/16/2020 10:10am
3/16/2020 10:10am Edited Date/Time 3/16/2020 10:11am
Case splitter, Steering wheel puller, or a harmonic balancer puller May work... if not I’m sure there’s a cheap universal flywheel puller on eBay or amazon that would work fine...
KX500
Profile picture for user KX500
Posts
283
Joined
8/30/2018
Location
Chester, IL US
KX500 3/16/2020 11:13am
3/16/2020 11:13am
Thanks! Have one ordered now & cheap enough.

I just knew there was some other name for what I needed, but having never removed a steering wheel or harmonic balancer, it was probably never going to come to me!

Post a reply to: Recommend Old Style Flywheel Puller