RM125 Ti Pegs

m1ke2001
Profile picture for user m1ke2001
Posts
101
Joined
3/24/2017
Location
Odenton, MD US
m1ke2001
Edited Date/Time 7/22/2017 9:55am
I want to find Titanium pegs for my 07 RM125 and I have seen a few around but I want the new Works Connection one's but they don't offer them for my bike but some have said 2013 ktm 250sx pegs will work. Anybody know if this is entirely true? A few people said this to so it kinda sound like it may work.
|
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 7/14/2017 4:28pm
7/14/2017 4:28pm
i modded some late model RMZ-450 pegs on my RM125.

1
m1ke2001
Profile picture for user m1ke2001
Posts
101
Joined
3/24/2017
Location
Odenton, MD US
m1ke2001 7/14/2017 5:27pm
7/14/2017 5:27pm
Bruce372 wrote:
i modded some late model RMZ-450 pegs on my RM125. [img]https://flic.kr/p/qFri17[/img]
i modded some late model RMZ-450 pegs on my RM125.

what year? I heard the RMZ pegs don't fit at all.
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 7/14/2017 7:41pm
7/14/2017 7:41pm
Those in the picture are torq1 steel pegs from a 2015 rmz450. I bought them, put them on my 450 and realizes they were cheap made in China product that didn't fit right.

They won't bolt straight up to the rm125, I just put them in and slowly filed the stopper until they sit at the right height. The post is 1mm shorter also, but you can shim that with a washer

The Shop

See All »
zac_k3
Profile picture for user zac_k3
Posts
578
Joined
3/5/2017
Location
TN US
zac_k3 7/15/2017 8:15pm
7/15/2017 8:15pm
I've read all over vital that newer ktm pegs fit the rms, I'm curious if the people who run them use the stock Suzuki hardware or if you have to use ktm hardware too.
Slosh 112
Profile picture for user Slosh 112
Posts
1155
Joined
3/31/2014
Location
Mackay QLD AU
Slosh 112 7/16/2017 1:18am
7/16/2017 1:18am
06 RM250's came standard with Titanium footpegs, That year only and only the 250's. They are hard to come by and as far as I remember they share the same part number as the standard steel pegs of different year models, so they are impossible to get unless you got an 06 RM250 new.

KTM footpegs are the same as Suzuki, their OEM from as far back as anybody can remember will go straight on a Suzuki up until at least 2013 year model (not sure about 2014 or newer models).
Gary105
Profile picture for user Gary105
Posts
196
Joined
2/10/2014
Location
Douglas, MA US
Gary105 7/21/2017 1:23pm
7/21/2017 1:23pm
I have KTM Raptor pegs on my 07 RM250

Jbulz
Profile picture for user Jbulz
Posts
882
Joined
3/29/2016
Location
Ithaca, NY US
Fantasy
4086th
Jbulz 7/22/2017 9:55am
7/22/2017 9:55am
2006 RMs came with Ti pegs. I have the stockers on my 250 and they're pretty nice, could be a little wider tho.
Joyner41
Profile picture for user Joyner41
Posts
151
Joined
1/17/2017
Location
Rohnert Park, CA US
Fantasy
1803rd
Joyner41 7/28/2017 9:22am
7/28/2017 9:22am
I literally just bolted up a set of Propegs 2004-2015 KTM pegs, and they are STELLAR. I did end up using the stock KTM springs (cheap, i think 1.40 a piece), and I ordered a matching KTM Ti pin that bolted up just fine. In my build page there are pretty close up pics of the install.

Hope this helps!

http://www.ebay.com/itm/Pro-Pegs-titanium-footpegs-2004-2015-KTM-SXF-SM…

http://www.vitalmx.com/forums/Bike-Builds,46/Not-another-RM125,1312944?…
Gary105
Profile picture for user Gary105
Posts
196
Joined
2/10/2014
Location
Douglas, MA US
Gary105 7/28/2017 9:32am
7/28/2017 9:32am
Joyner41 wrote:
I literally just bolted up a set of Propegs 2004-2015 KTM pegs, and they are STELLAR. I did end up using the stock KTM springs (cheap...
I literally just bolted up a set of Propegs 2004-2015 KTM pegs, and they are STELLAR. I did end up using the stock KTM springs (cheap, i think 1.40 a piece), and I ordered a matching KTM Ti pin that bolted up just fine. In my build page there are pretty close up pics of the install.

Hope this helps!

http://www.ebay.com/itm/Pro-Pegs-titanium-footpegs-2004-2015-KTM-SXF-SM…

http://www.vitalmx.com/forums/Bike-Builds,46/Not-another-RM125,1312944?…
When i used the Raptor Ti pegs that were made for the KTM i used KTM springs and Yamaha YZ pins cause they are lighter than the RM and KTM pins.

Post a reply to: RM125 Ti Pegs