Create New Tag

11/24/2017 9:20 PM

Hi guys just wondering what would be a good psi to run for mx? Mostly hard pack,running michelin tubes/tyres if that makes any difference


11/24/2017 10:38 PM

I’d say between 13-15. Some go a little lower though


2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

Thanks to : Factory Effex, Simi Valley Cycles, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, Mika Metals

11/24/2017 11:47 PM

I run Michelin starcross 5s. I run 13 rear 14 front. But imo just set them both at 14 and go ride it. Then come back and change one psi one tireat a time and see how it feels. Every track is different and people are different.


11/25/2017 5:43 AM

I run 12.5-13 on Dunlop Mx3S and when I had Michelin Starcross 5 I went to 14-14.5 because the sidewalks felt so soft.


11/25/2017 7:27 PM

Thanks for the info guys I’ll give the 14-14 a go and see how it feels cool


11/25/2017 7:38 PM

12-12 in most circumstances with Starcross 5's. 13 with MX3S. 15-15 in the rocky woods.


Tomac and/or Anderson for 2020.....