Preload spacers 87 CR250

Related:
Create New Tag

10/29/2017 10:07 AM

I purchased new fork springs from Race Tech recently. Instructions say 4mm of pre-load is the standard amount. My question is, how long should I cut the PVC piece that came with the springs for my weight and ability? I'm 6ft 2in tall and weigh 205, intermediate vet rider. Ride moto only, mostly sand type tracks in FL. I'm thinking I will need more pre-load than standard. I emailed Race Tech, sent me back a link on assembly / disassembly. Thanks everyone.

|