Powder coating frame black ? 18 crf 450

Related:
Create New Tag

11/13/2019 6:12 PM

I want to do this to my bike but little nervous cause where my knees rub and the Honda 2018 oem sticker being melted off . Didn’t know if i had some night temp heat tape over it . Just curious on those who have done this before. Thank you

|

11/14/2019 10:09 PM

I had a frame done red once and would never do it again. The powder coat doesn’t stay looking nice very long. Mine actually wore off pretty quick where my boots rubbed. Powder coat was done by a reputable shop also.

|

11/15/2019 12:19 AM

If you do it, get a set of black Polisport frame guards so that your boots wont wear out the paint.

|

11/15/2019 4:04 AM

I never advocate any frame coatings.

1. It wears off quickly
2. It kills the value of the bike

|

11/15/2019 4:10 AM

kb228 wrote:

I never advocate any frame coatings.

1. It wears off quickly
2. It kills the value of the bike

What about steel frame bikes, such as KTM and Husky? They’re already done, so re-doing them isn’t going to do anything to the value.

|

11/15/2019 4:12 AM

kb228 wrote:

I never advocate any frame coatings.

1. It wears off quickly
2. It kills the value of the bike

T-Fish wrote:

What about steel frame bikes, such as KTM and Husky? They’re already done, so re-doing them isn’t going to do anything to the value.

Theyre steel frames, they have to be coated. They come that way from the factory.

Were talking about a honda with an alumimum frame.

|

11/15/2019 4:14 AM

I know. I’m just giving you shit, really. Carry on guys!

|

11/15/2019 4:55 AM

T-Fish wrote:

I know. I’m just giving you shit, really. Carry on guys!

Ah no worries dude

|

11/15/2019 5:11 AM

It makes a lot of sense it wokt last long was thinking of having the guy go xtra thick around the boot area

|

11/15/2019 6:44 PM

Have them put a coat of clear over the color not just single coat of color. The clear will protect the color and should last longer

|

11/17/2019 1:17 PM

Bogett287 wrote:

It makes a lot of sense it wokt last long was thinking of having the guy go xtra thick around the boot area

If you do it get some clear vinyl to put over the spots where your boots rub it. Then when it starts looking like crap just get a heat gun, peel off the old, and put fresh on.

|

11/17/2019 5:21 PM

Please don't do it.

|