Nickle Plating Exhaust

Create New Tag

6/14/2017 3:03 PM

Has anyone tried to nickle plate there stock exhaust on a 2 stroke . Instead of repainting in high heat black . Just a idea i have if anyone out there has done it... Thanks for any input .....


6/14/2017 5:05 PM

Many years ago I had this done. It was very costly as a used pipe has to be cleaned both outside and inside before it can be done and cleaning the inside of a pipe is very hard to do. It worked out at the time, but it would have cost less to have just purchased an aftermarket pipe that was already plated.
Once you do have a nickel plated pipe it will require a lot of care and attention to keep it looking nice.

Paw Paw


6/16/2017 2:51 AM

Just strip the paint off the stocker and get the works look
Here's one I prepared earlier Photo