Posts
71
Joined
12/20/2016
Location
Troy, IL
US
Edited Date/Time
4/9/2020 10:11pm
I bought a used 2016 450R and immediately bought spare brake and clutch lever as I do some trail riding as well.
Anyway, bent the brake lever in Moab and instead of using my spare, I just bought another to install and leave my spare. Well, the new lever isn't correct and I check my spare and it is incorrect as well. I looked up a '14 and a '18 model ( just in case I had a different year master cylinder ) and they use the same lever... so now I don't know what I have on there.
I have a Nissen master cylinder ( don't know if that is factory or not ) but the new levers are too thick to fit in the perch and have this extra rotating piece in there too.
Anyway, this is what I have.
Anyway, bent the brake lever in Moab and instead of using my spare, I just bought another to install and leave my spare. Well, the new lever isn't correct and I check my spare and it is incorrect as well. I looked up a '14 and a '18 model ( just in case I had a different year master cylinder ) and they use the same lever... so now I don't know what I have on there.
I have a Nissen master cylinder ( don't know if that is factory or not ) but the new levers are too thick to fit in the perch and have this extra rotating piece in there too.
Anyway, this is what I have.
I would just go to my local shop and start trying levers but given the virus scare, probably not going to do that.
Post a reply to: Mystery Brake Lever '16 CRF450R