Mikuni tmx 38mm throttle slide plating issue

jwolfman317
Profile picture for user jwolfman317
Posts
34
Joined
7/29/2019
Location
Kechi, KS US
jwolfman317
This is on a 2018 ktm 125. In the course of my pursuit of better jetting specs, I’ve had issues with the plating flaking off of the replacement slides that I have purchased. The original 4.0 had 70 hrs on it with only minor scuffing but no flaking. The Kx125 5.5 slide started flaking right away, and after 10 hrs I pulled it for that reason, and I also felt like it was too lean of a slide. Then I purchased a 5.0, from JD Jetting, and it’s held up better, but l I’ve noticed a bit of flaking on it after about 15 hrs. Also, the inside of the throttle body appears to be smooth. Has anyone else had these issues?
|
digger
Profile picture for user digger
Posts
737
Joined
4/1/2008
Location
Upstate, NY US
Fantasy
3883rd
digger 8/20/2019 6:45am
8/20/2019 6:45am
I haven't seen that many problems with flaking chrome, but i don't usually use optional slides. I almost always cut the OEM slide to what I feel it needs to be, or slightly richer. I can alway remove material. What I have seen a bunch of times, is cracked and or missing pieces of Mikuni TMX-x slides. I haven't seen it so much with the newer Mikuni equipped KTM's, but the Japanese Mikuni TMX-x bikes, I have for sure.
Austin_Rankin 9/12/2019 4:18pm
9/12/2019 4:18pm
look into after purchasing new slide send carb and slide off to WPC. for WPC Treatment, bet you wont have any issues again.
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 9/12/2019 4:25pm
9/12/2019 4:25pm
Get a kehin and a stic metering block. Also order up the next size Jersey, this mod will stretch your arms
jwolfman317
Profile picture for user jwolfman317
Posts
34
Joined
7/29/2019
Location
Kechi, KS US
jwolfman317 9/12/2019 4:40pm
9/12/2019 4:40pm
Austin_Rankin wrote:
look into after purchasing new slide send carb and slide off to WPC. for WPC Treatment, bet you wont have any issues again.
What is WPC treatment? How much does it cost?

The Shop

See All »
jwolfman317
Profile picture for user jwolfman317
Posts
34
Joined
7/29/2019
Location
Kechi, KS US
jwolfman317 9/12/2019 4:40pm
9/12/2019 4:40pm
Bruce372 wrote:
Get a kehin and a stic metering block. Also order up the next size Jersey, this mod will stretch your arms
I have heard a lot of good things about this. How much does it cost?
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 9/12/2019 5:01pm
9/12/2019 5:01pm
Bruce372 wrote:
Get a kehin and a stic metering block. Also order up the next size Jersey, this mod will stretch your arms
jwolfman317 wrote:
I have heard a lot of good things about this. How much does it cost?
350 plus a new carb

Transforms the bike

Post a reply to: Mikuni tmx 38mm throttle slide plating issue