Kx125

Craigyw1984
Edited Date/Time 5/9/2020 10:20am
What years crankshaft fits kx125 2002. Seem to be difficult to source. Or is it a case of having it rebuilt.
|
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 5/7/2020 5:22pm
5/7/2020 5:22pm
Ken oconnor does a good job at rebuilding cranks & its cheaper than buying a new one
1
Craigyw1984 5/9/2020 2:26am
5/9/2020 2:26am
I have found a local machinist who rebuilds so that's sorted. Is there an alternative to buying all OEM bearings and seals etc. Would rather buy a reputable kit
walent215
Profile picture for user walent215
Posts
2417
Joined
12/6/2014
Location
Ridgecrest, CA US
walent215 5/9/2020 3:58am
5/9/2020 3:58am
Craigyw1984 wrote:
I have found a local machinist who rebuilds so that's sorted. Is there an alternative to buying all OEM bearings and seals etc. Would rather buy...
I have found a local machinist who rebuilds so that's sorted. Is there an alternative to buying all OEM bearings and seals etc. Would rather buy a reputable kit
Pro-x, All Balls, Hotrods etc
1

The Shop

See All »
dkurtd
Profile picture for user dkurtd
Posts
904
Joined
4/15/2018
Location
TN US
dkurtd 5/9/2020 6:42am
5/9/2020 6:42am Edited Date/Time 5/9/2020 6:43am
It's my experience that OEM bearing and seals are better quality then any aftermarket and last much longer, yes they are a little more expensive. I would be careful buying aftermarket as most are cheap Chinese bearings.
Craigyw1984 5/9/2020 10:19am
5/9/2020 10:19am Edited Date/Time 5/9/2020 10:20am
Before I buy spares can you guys confirm this engine is an 02 from the code? Gonna get Koyo mains and seals kit.
Wossner piston and Conrod kit. Crank rebuild.

Post a reply to: Kx125