Ktm 250sx flywheel nut

Pirate421
Posts
1812
Joined
7/26/2015
Location
MA US
10/16/2017 4:53pm Edited Date/Time 10/16/2017 5:26pm
Looking for some help. I installed a steahly fww on my 14 250sx three years ago. Rode a few buddies bikes recently and realized I don't like the weight on there. Since I installed the weight I have moved a few times and have lost the nut that holds the stock flywheel. The nut is replaced by the steahly weight so it is unused during installation. I've looked part schematic on RM but can't seem to find what size nut I need or what the part # may be. Also is there a washer behind the nut? Haven't gotten the weight off yet as I need new bolts for the install:removal tool. What a mess! Thanks for any help!
|
ktm-5
Posts
555
Joined
2/17/2017
Location
Ravenna, MI US
10/16/2017 5:02pm


Number 19 is the washer and 20 is the nut
Pirate421
Posts
1812
Joined
7/26/2015
Location
MA US
10/16/2017 5:25pm
ktm-5 wrote:
[img]https://p.vitalmx.com/photos/forums/2017/10/16/220455/s1200_Screenshot_2017_10_16_19_57_56.jpg[/img] Number 19 is the washer and 20 is the nut


Number 19 is the washer and 20 is the nut
Heckin' A man, thanks! Guess I was looking at the wrong schematic I was looking at the ignition with the flywheel and wondering why there was no hardware. Appreciate it!
ktm-5
Posts
555
Joined
2/17/2017
Location
Ravenna, MI US
10/16/2017 5:29pm
Yeah it's on the crank asembly and No problem

Post a reply to: Ktm 250sx flywheel nut

The Latest