Ktm 250sx flywheel nut

Related:
Create New Tag

10/16/2017 4:53 PM
Edited Date/Time: 10/16/2017 4:54 PM

Looking for some help. I installed a steahly fww on my 14 250sx three years ago. Rode a few buddies bikes recently and realized I don't like the weight on there. Since I installed the weight I have moved a few times and have lost the nut that holds the stock flywheel. The nut is replaced by the steahly weight so it is unused during installation. I've looked part schematic on RM but can't seem to find what size nut I need or what the part # may be. Also is there a washer behind the nut? Haven't gotten the weight off yet as I need new bolts for the install:removal tool. What a mess! Thanks for any help!

|

10/16/2017 5:02 PM

Photo

Number 19 is the washer and 20 is the nut
|

10/16/2017 5:25 PM

ktm-5 wrote: Photo

Number 19 is the washer and 20 is the nut

Heckin' A man, thanks! Guess I was looking at the wrong schematic I was looking at the ignition with the flywheel and wondering why there was no hardware. Appreciate it!

|

10/16/2017 5:29 PM

Yeah it's on the crank asembly and No problem

|