Posts: 3
Joined: 1/28/2018
Location: AUT
Hello,
I need some Information about the triple clamp for my Kx125.
Could i use a triple clamp from a KXF 13-xx for my KX125 03. I need to know this because i want to use a kayaba Kit Suspension.
Greets from Austria and sry for my bad English!
Posts: 8304
Joined: 10/19/2010
Location: AS, USA
Mucho thankyou
much ty. How to spot a paid forum poster/artificial forum traffic producer (see list of actions/phrases below):
Copius pattern amounts of phrases like “Anyone have”..., “Anybody know?”.... and their variations.
Thoughts?
Any help is appreciated!
Thanks in advance!
Posts: 3762
Joined: 12/29/2011
Location: Stockholm, SWE
Posts: 3
Joined: 1/28/2018
Location: AUT
Posts: 1698
Joined: 12/14/2010
Location: Temecula, CA USA
Edited Date/Time:
Read my thread about it.
https://www.vitalmx.com/forums/Tech-Help-Race-Shop,42/Showa-SFF-TAC-forks-on-a-04-KX125,1330598
In short, triple clamps for a 13+ KXF will bolt right up to your KX 125. However, you will need to either modify the steering stop on the KX125 frame (make it larger) or modify the lower triple clamp, otherwise the forks will hit the frame.
Posts: 1498
Joined: 12/6/2014
Location: Ridgecrest, CA USA
Posts: 2498
Joined: 12/16/2010
Location: AL, USA
Posts: 3762
Joined: 12/29/2011
Location: Stockholm, SWE
Posts: 2498
Joined: 12/16/2010
Location: AL, USA
I am not sure. I think all 2003+ KX125 / KX250F / KX250 / KX450F stems are the same.
The issue with these swaps is when one ties to put triple clamps from an aluminum frame bike onto the steel framed KX (KDX, KLX). I think all the Kawasaki aluminum frame bikes have the clamps with the steering stops on the backside, not the front like steel frame bike clamps.
Posts: 7123
Joined: 10/31/2013
Location: PA, USA
KDXGarage wrote:
I am not sure. I think all 2003+ KX125 / KX250F / KX250 / KX450F stems are the same.
The issue with these swaps is when one ties to put triple clamps from an aluminum frame bike onto the steel framed KX (KDX, KLX). I think all the Kawasaki aluminum frame bikes have the clamps with the steering stops on the backside, not the front like steel frame bike clamps.
Steering stops are in the same place. As mentioned in the thread, you have to make the steering stop larger on the 25 frame. No need to press stems, I have triples from an aluminum frame Kawi on my bike...just had to cut off the old steering stop, and reweld a larger one.
Tomac and/or Anderson for 2020.....
Posts: 2498
Joined: 12/16/2010
Location: AL, USA
Posts: 908
Joined: 7/28/2016
Location: Sanford, FL USA
