KXF SFF Spring fork conversion for CRF250

Cmiller493
Profile picture for user Cmiller493
Posts
252
Joined
1/15/2011
Location
Hays, KS US
Cmiller493
Has anyone ever ever tried to throw SFF Spring forks from the older kawis onto a 2015+ Crf250 I thought about throwing a set of mint 2011 kx250f forks on my 2016 crf250 and wondered what I would need to do for the conversion?
|
jamiechapman418 6/25/2020 11:15am
6/25/2020 11:15am
See if the fork tube diameters are the same. If they are then you can use your same triple clamps. If not, you will need to use the triple clamps off of the kx250f. Not a clue where you would start on spring rates though. What ever matched the honda maybe? My buddy did the RaceTech air to spring fork conversion on his. Not too spendy really and was a piece of cake to install.
Spudnut
Profile picture for user Spudnut
Posts
1946
Joined
6/25/2018
Location
WA US
Spudnut 6/25/2020 5:59pm
6/25/2020 5:59pm
I had those single spring forks on my 2012 kx250f. Not to be confused with the SFF air, the SFF “spring” fork was pretty dang good to me once I realized how over sprung it was
Keith72
Profile picture for user Keith72
Posts
390
Joined
7/17/2010
Location
Omaha, NE US
Keith72 6/26/2020 7:53am
6/26/2020 7:53am
Wheel spacers might need to be changed too.
soggy
Profile picture for user soggy
Posts
4917
Joined
12/3/2018
Location
UT US
Fantasy
3857th
soggy 6/26/2020 8:12am
6/26/2020 8:12am
Easiest way is probably using the entire kx front end

Post a reply to: KXF SFF Spring fork conversion for CRF250