KX 125 rubber frame pads

Related:
Create New Tag

3/21/2018 9:07 PM

What’s the best way to adhere these to the frame after you have frame painted?Photo

|

3/21/2018 11:58 PM

Is the frame powder coated or painted??

|

2018 crf 250r

3/22/2018 3:54 AM
Edited Date/Time: 3/22/2018 3:56 AM

My 92 kx125 had them glued on. My kx250f & 450f have glue and a hole in the frame they snap into.

Look for a glue that doesnt eat paint away. Not sure what that would be. Maybe a SMALL amount of super glue

|

3/22/2018 4:25 AM

I would just use gorilla glue , or or a eco friendly adhesive just follow directions and maybe score the spot where it's going .

|

2018 crf 250r

3/22/2018 5:05 PM
Edited Date/Time: 3/22/2018 5:05 PM

I used super glue on my kx 2 years ago and they are still in place. no issues here.

|

3/22/2018 5:26 PM

ricko wrote:

I used super glue on my kx 2 years ago and they are still in place. no issues here.

Good to know thanks!

|

3/23/2018 2:54 AM

3M weatherstrip adhesive. Available in a big tube at your local auto parts store. You can also use it on grips. I’d suggest black (it also comes in a yellow like contact cement).

|

3/23/2018 6:46 AM

Also if you use adhesion promoter it really helps stuff stick. I like the little 3M one use packs
Photo

|

2018 KTM 250sx
Instagram CamaroAJ

3/23/2018 9:43 AM

omalley wrote:

3M weatherstrip adhesive. Available in a big tube at your local auto parts store. You can also use it on grips. I’d suggest black (it also comes in a yellow like contact cement).

x2. Weatherstrip adhesive is the correct method in my opinion. I use it on all my frames. You can use zip ties to hold it tight while the glue dries.

|