KTM Factory Brembo Calipers - help needed

Related:
Create New Tag

12/27/2017 1:46 PM

I have purchased a set of used factory calipers for my 2018 150sx, and the seller has said there are 2 rear calipers to choose from. Does anyone know which is the correct one?
Photo

One measures 65mm and the other measures 67mm:
Photo
Photo

I’m nowhere near my bike right now so can’t measure it. If anyone had a 2018 KTM and could take some measurements, it would be really appreciated.

|

12/27/2017 5:33 PM

Hey man, I tried to be of some help but I feel like I’m getting a measurement of 65mm. The area of 1mm difference is very hard to measure when you are eye balling the middle to middle. This was off a 2016 125. At first I felt like I was getting a measurement of 66.675, so I was leaning towards the 67mm. Hope this is some help to you!

|

12/27/2017 6:55 PM

Thanks very much, Joe. I think you’re right in that 65mm is the right caliper, and I’m going to tell him to send the smaller, darker looking one on the right.

|

12/28/2017 4:40 AM

There were 2 types of SXS calipers. Older (bigger and shaped like stock parts), and newer (more rounded in shape and smaller).
I am 90% sure the one to the left on 1st pic is older style, the one to the right is newer. Can you PM me about the price on those? I might be interested in the one that you pass on.

|

12/28/2017 3:51 PM
Edited Date/Time: 12/28/2017 4:52 PM

Thanks for confirmation on fitment. I will email you the details mate.

|