KTM/FAG Main Bearings

wpark89
Profile picture for user wpark89
Posts
1116
Joined
12/9/2009
Location
Mattawa, WA US
wpark89
Looking for crank bearings for an older 250 SX.

Several OEM KTM bearings are FAG bearings

KTM's NJ207ET2XCS42 run around 100 bucks
I can get a FAG NJ207ETVP online for $50 anyone know if that is an equivalent?

Also would the 62206-2RSR be ok in place of the KTM number 62206.803107?
|
captmoto
Profile picture for user captmoto
Posts
5153
Joined
4/22/2009
Location
Rancho Cucamonga, CA US
captmoto 7/8/2020 11:34am
7/8/2020 11:34am
You should be able to use them as long as they are the same speed and tolerance ratings. I think the mains should be a C2 rating. There should be dimensions on the bearing. They would be inner, outer and width but maybe not in that order. A good bearing house should be able to help you out. Turns out the steering stem bearing on my FC450 is the same size as the outer axle bearing on my trailer. As long as they aren't Chinese crap you should be OK.
2

Post a reply to: KTM/FAG Main Bearings