Husky TX300 Clutch not engaging all the way

Related:
Create New Tag

11/14/2018 7:17 PM
Edited Date/Time: 11/14/2018 7:18 PM

Maybe this is normal, not sure. When the bike is off and in gear, even with the clutch pulled, it won't roll. If the bike is running the clutch engages enough to keep it from stalling. Is it possible to adjust the engagement? My previous bike had a rekluse so i didn't notice if it did a similar thing

|

11/14/2018 7:51 PM

oem levers or arc?

|

11/14/2018 9:11 PM

DTR830 wrote:

oem levers or arc?

OEM Levers. I have the twist knob all the way out already

|

11/15/2018 9:16 AM

Bikes don't roll easy with the clutch pulled in and in gear. It is the nature of the gear reduction system in the trans. Remember that you have a very low overall gearing due to the engines high rpm limits and the speeds derived from said gearing. It is a big mechanical advantage and thus it will not roll easy that way. That is normal.

Paw Paw

|

11/15/2018 9:17 AM

Paw Paw 271 wrote:

Bikes don't roll easy with the clutch pulled in and in gear. It is the nature of the gear reduction system in the trans. ...more

Good to know. Thanks

|

11/16/2018 6:10 PM

Could have air in system, if it creeps when you put it in gear, with clutch pulled in...may need to bleed line...

|