Husky Subframe breakage.

skypig
Profile picture for user skypig
Posts
681
Joined
8/1/2009
Location
Caloundra AU
skypig
Edited Date/Time 5/12/2019 6:48pm
Got run into today. FS450 (Supermoto. FC450 with road wheels.)
FMF Ti muller bent. Subframe very broken.

Is this common?
Never even bent a subframe before, in my life.
Not going to be cheap in OZ. (Think of a number, multiply it be 1.3, then double it....)




|
Jrewing
Profile picture for user Jrewing
Posts
2865
Joined
1/4/2014
Location
AU
Jrewing 5/12/2019 3:59am
5/12/2019 3:59am
I said to Matt Mladin when his talking about his husky a few years ago “boy that’s going to expensive to replace the subframe if you break it”
He said it doesn’t matter! I believed him. Me..I hating spending and it’s bum me out.
Keen to hear how much they are
DB97
Profile picture for user DB97
Posts
1165
Joined
7/28/2016
Location
Orlando, FL US
DB97 5/12/2019 6:21am
5/12/2019 6:21am
Yeah my friend had it happen. It's in three pieces and the battery tray is in the middle super tricky.
soggy
Profile picture for user soggy
Posts
4885
Joined
12/3/2018
Location
UT US
Fantasy
3846th
soggy 5/12/2019 6:51am
5/12/2019 6:51am
insurance? i think it's about a ~300 US$ part.

The Shop

See All »
Shawn_Sinclair
Profile picture for user Shawn_Sinclair
Posts
136
Joined
6/6/2018
Location
Snowmass Village, CO US
Shawn_Sinclair 5/12/2019 7:55am
5/12/2019 7:55am
I just replaced my aluminum sub frame on my 350sx and it was 250 ish US. If its crazy expensive I guess you could go this rout. Its not carbon but it will be straight.
soggy
Profile picture for user soggy
Posts
4885
Joined
12/3/2018
Location
UT US
Fantasy
3846th
soggy 5/12/2019 8:18am
5/12/2019 8:18am
Shawn_Sinclair wrote:
I just replaced my aluminum sub frame on my 350sx and it was 250 ish US. If its crazy expensive I guess you could go this...
I just replaced my aluminum sub frame on my 350sx and it was 250 ish US. If its crazy expensive I guess you could go this rout. Its not carbon but it will be straight.
are the husky/ktm subframe interchangeable? I think you'd have to do the airbox and shit too if they are.
Shawn_Sinclair
Profile picture for user Shawn_Sinclair
Posts
136
Joined
6/6/2018
Location
Snowmass Village, CO US
Shawn_Sinclair 5/12/2019 12:52pm
5/12/2019 12:52pm
I thought the KTM and Husky were interchangeable I could be wrong though.
skypig
Profile picture for user skypig
Posts
681
Joined
8/1/2009
Location
Caloundra AU
skypig 5/12/2019 6:48pm
5/12/2019 6:48pm
GaryC1 wrote:
Hard to tell from the photo which bit has actually broken but I use this site a lot for checking parts and if I'm right, it...
Hard to tell from the photo which bit has actually broken but I use this site a lot for checking parts and if I'm right, it looks like you need number 4 which is $239 and in stock.

https://au.fowlersparts.co.uk/parts/5861062/fc-450/frame

Could be worse, a KTM full subframe is listed for $456.




Correct.
Thanks for your help.
1
AJ565
Profile picture for user AJ565
Posts
2079
Joined
3/12/2012
Location
San Antonio, TX US
AJ565 5/13/2019 6:22am
5/13/2019 6:22am
Shawn_Sinclair wrote:
I thought the KTM and Husky were interchangeable I could be wrong though.
They are not. They mount to the frame differently.
skypig
Profile picture for user skypig
Posts
681
Joined
8/1/2009
Location
Caloundra AU
skypig 5/13/2019 2:56pm
5/13/2019 2:56pm
OK

Not going to be cheap in OZ. (Think of a number, multiply it be 1.3, then double it....)


US$120 here: (part #4)

https://www.ktmpartspro.com/oemparts/a/hqv/59dff3aceb0bedad1caf75df/fra…

$120 x 1.3 = 156.
156 x 2 = 312

I was close - Australian price - A$348 (My dealer gave me a better price)

Probably didn’t take into account that $US1 is worth about A$1.44 right now.
1

Post a reply to: Husky Subframe breakage.